Home Up Feedback Contents Search

Vision FAQ

This is a historical page from the old MaxMax.com website. Please use the current site at www.MaxMax.com.


IR Products UV Products Cameras Flashlights Detection Cards Inks & Powders Security Paper Vision FAQ Neat Stuff

A short education on color, infrared and ultraviolet light.

Color can be defined by particular wavelength(s) of light.  A pure color will have one particular wavelength such as 450nm will appear as a vibrant blue.  The nm stands for nanometer and is a measure of length.  One nanometer is a billionth of a meter.  The measurement is for one full light wave length. 

Humans can see from about 400nm (violet) to 750nm (red).  Below 400nm is ultraviolet light.  Above 750nm is infrared.

The human eye is not equally sensitive to all colors.  We see color best during the day when we are using the cone sensors in our retinas.  Below is a graph showing how the cone eye sensors are more sensitive at some wavelengths than others.

The human eye also changes in color sensitivity depending on the ambient light.  During the day, the eye uses cone sensors in retina which are color sensitive and high resolution.  At night, the eye switches to rod sensors which are not very color sensitive.  At very low illumination levels the eye cannot see color at all.

The eye is most sensitive in the green - yellow portion at around 550nm at night when it is using its rod sensors.  

 

So where does the human eye see relative to other wavelengths?  Below is a graph showing the human range of the electromagnetic spectrum and where it fits relative to other bands.  

 

Ultraviolet Classifications

bulletUV-A: 320nm to 400nm
bulletUV-B: 280nm to 320nm
bulletUV-C: 100nm to 280nm

 

Infrared Classifications

bulletNear-IR: 750nm to 3000nm (0.75 to 3.0 microns)
bulletMid-IR: 3,000nm to 30,000nm (3 to 30 microns)

  1. Mid-Wave IR (MWIR) 3,000nm to 8,000nm (3 to 8 microns)

  2. Long-Wave IR (LWIR) 8,000nm to 12,000nm (8 to 12 microns)

bulletFar-IR: 30,000nm to 350,000nm (30 to 350 micons)

 

Your typical infrared enabled digital camera (e.g. Sony Camera with NiteShot), can see between 400nm and 1100nm.  The non-human visible range between 750nm and 1100nm is called the Near IR (NIR) range.  The NIR does not see heat.  Heat is seen in the 8,000nm to 13,000nm range called the Long-Wave (LWIR) range.

We do have a thermal MIR camera available which can see heat and make non-contact temperature measurements. 

 

                                

 

Send mail to [email protected] with questions or comments about this web site.
Last modified: June 18, 2015